I made a case with V on it, hehe. 

Inspired by the following:

^comme des garcons jacket              ^hoodie selfies!!                    ^brown hairrr                                  

Easy DIY! 

Materials used: 1 Clear phone case (I got mine on eBay for $2), 1 copy paper with the phone template printed, set of markers and a pen, scissors, hole puncher (optional)

1) Print out the phone template that works with your phone model. If there is no template available on the internet, you might want to measure out your phone and do it manually with a ruler. On the piece of paper, using a pen, draw whatever you'd like on the template. You might want to use pencil for sketching if you're afraid of messing up. 

2) Using markers, color in your picture or character. I didn't have copic markers but I had something similar that I bought from Barnes and Noble, 24 alcohol-based markers for $40 (it was so expensive but i saved up to buy that for my birthday lol). If you can't afford copics, don't worry! You can still use any type of markers. Just watch out for bleeding and coloring too much that the paper starts to rub off. 

3) After you're done, carefully cut out the phone template with your drawing. Use the hole puncher with the scissors to help you cut out the camera hole. If you don't have a hole puncher you can always carefully fold the paper enough so that you can cut a hole for the camera. 

4) Test your paper cutout on your case. If it's still too big, measure and trim the edges of the paper so that it fits. Also check to see if your camera hole is cut well enough for the case. 

5) Place the paper inside the case and then clip your phone on. Ta-da!! 

I hope some of you guys get to try this. It's pretty simple, and if you have approx 2 to 5 dollars, that's enough of a budget to get you started. Have fun! ^-^